I am often asked if there is a way to install multiple builds on Kodi and after trying different techniques, I found a way. And, in this guide, I am going to share how to install more than one Kodi build on Kodi supported devices including Amazon Fire Stick / Fire TV Cube.
Kodi is one cool media player that plays the media on your local device. But, the true potential of Kodi is explored when you use it with plugins (called add-ons) and stream the content over the internet. There are dozens of free Kodi addons out there to fetch you the media you wish to watch. You may think of addons as the bridge between Kodi on your device and the vast world of free content out on the web.
The mention of addons leads us to builds. A Kodi build is also a plugin but different from an addon in the way it functions. Addon management seems like the primary role of any build. The builds come with preinstalled addons so that you don’t have to install them individually. Builds also give a complete makeover to Kodi, visually as well as functionally. Install a build and not only will you get preconfigured addons but also a whole new interface to interact with Kodi. Some Kodi builds are extremely popular among Kodi users than the others.
A lot of users have asked me if they could install and use more than one build on Kodi. I am glad I could finally find the answer. Let us discuss this further.
Is It Possible to Install Multiple Kodi Builds?
Yes, it is possible to install and use multiple builds. But, to do that, the traditional method wouldn’t work. What I mean is that you cannot install more than one build on the same instance of Kodi. You will need to install a Kodi fork on your FireStick. A fork is a ‘clone’ of Kodi, you can say, or a replica. I will tell you more about Kodi forks later. Let me first tell you why you need multiple instances of Kodi for this.
When I was trying to figure out how to install multiple builds, I first installed Supreme Kids build and then the Titanium Build on Kodi. At first, I was surprised and pleased to see that the Supreme Kids build would let me deploy Titanium Build. However, when I relaunched Kodi after installing Titanium, I noticed that the previous build had been completely overwritten by it. I went to Interface settings and found that Supreme Kids’ skin had also been removed. I also checked the size of the Kodi data and discovered that the data of the previous build had not been deleted. That’s my fault though, as I didn’t choose Fresh Install before the installation.
The conclusion is that Kodi will technically let you install multiple builds. But the last installed build will overwrite all the previous builds without truly deleting their data (until you specifically instruct it to).
So, this brings us back to Kodi fork.
Kodi fork is a copy of Kodi, sometimes with certain customizations. For instance, some Kodi forks come preinstalled with popular builds, like Titanium, others have preinstalled addons.
To install multiple builds, you need multiple instances of Kodi installed on FireStick. But, Fire Stick wouldn’t let you install multiple instances of the same app. This is why you need a fork. Even though fork is practically Kodi, your device treats it as a completely different application altogether.
Further, in this guide, we will learn
- How to install the Kodi fork on FireStick
- How to install a build on the fork
This guide demonstrates the installation of Titanium 18.1 fork from the Supreme Repository source.
How to Install Kodi Fork on Fire Stick
Please follow the steps below to install the Kodi Fork, Titanium 18.1 on FireStick:
Attention KODI Users: Read before you continue
Kodi Addons / builds offer unlimited streaming content, but could also get you into legal trouble if caught streaming free Movies / TV shows / Sports. Kodi users are strongly advised to always connect a VPN while streaming online. A good Kodi VPN hides your identity, bypasses government surveillance, geo-blocked content, and ISP throttling (which also helps in buffer-free streaming).
I use ExpressVPN which is the fastest and most secure VPN. It is very easy to install on any device including Amazon FireStick. You get 3-months free and save 49% on its annual plans. Also, it comes with a 30-day money-back guarantee. If you are not satisfied, you can always ask for a refund.
Click HERE to get 3-months free and save 49% on ExpressVPN
Read: How to install and use a Kodi VPN
#1. To sideload the APKs on FireStick, you need an additional app. While you could download the files from a link through a browser, I recommend the Downloader app. This app lets you quickly download the APKs and sideload them onto your FireStick.
To get Downloader, select the Search option on the home screen of FireStick. Search for this app and install it.
#3. Click the ‘Browser’ option on the right side of the Downloader home-screen
The web browser will appear on the right. By default, the browser opens the developer’s website aftvnews.com every time you click it. Unfortunately, it cannot be changed.
You should see a red, circular cursor over the browser window. Navigate to the address bar on the top and click inside it
#4. The onscreen keypad appears with the developer’s website URL prepopulated. Click the ‘Clear’ button on the bottom right (above ‘Go’ and next to ‘Delete’ button) to empty the field
Now, type in the following URL: repo.supremebuilds.com
Note: To type faster and more easily, you may use the Amazon Fire TV Remote app on your mobile
#5. You will be redirected to the browser window. Allow the webpage to load.
Now, click ‘Forks’ link on the page
#6. The next page displays the list of the Kodi forks available in this repository. As I already said, some of the forks come preinstalled with certain builds. For instance, if you wish to install Kodi Krypton 17.6 with Titanium Build, click the ‘titanium 17.6.apk’ link (second from the bottom)
However, if you want to start with fresh Kodi and install the build of your choice later, you will want the Kodi fork that does not come preinstalled with any build.
Therefore, we will install the Titanium 18.1 fork. This fork gives you a clean Kodi slate with just one addon preinstalled, Supreme Builds Wizard.
Click Titanium 18.1 apk
#7. The downloader will thus begin to download the Titanium 18.1 fork APK file onto your FireStick storage. It might take a few minutes.
Allow the download to finish
#8. When the APK has downloaded, Downloader app will instantly initiate the installation procedure.
Give your consent to install the Titanium 18.1 Fork by clicking the ‘Install’ option on the bottom right
#9 Again, wait for a little while.
The notification saying ‘App installed’ means what it says. Titanium 18.1 is installed on FireStick and you now have a Kodi clone.
Don’t click ‘Open’ yet. We will go back to the Downloader window and delete the APK file.
#10 Click the ‘Delete’ button to delete the Titanium 18.1 APK file.
The app is installed, you don’t need this file anymore. It is a good idea to clear up space whenever you get the opportunity.
#11 Click ‘Delete’ one more time to confirm your action.
Go back to FireStick home-screen. Press and hold the home button on the remote for a few seconds until the menu pops up. Click ‘Apps’ on the menu. Now, scroll down to the bottom where you will find the Titanium 18.1 fork icon. As you can see, Kodi and Titanium 18.1 can coexist on the same system.
How to Install a Build on Titanium 18.1 Kodi Fork
Titanium 18.1 the replica of the original Kodi 18 Leia. It even gets the same updates as Kodi. So, you can install the builds on Titanium 18.1 Kodi fork as you would install it on the original Kodi.
Go to our list of Best Kodi Builds to explore the top builds we have hand picked for you. You will find the link to the installation guide with each build on this list.
Titanium 18.1 Kodi fork also comes preinstalled with Supreme Builds Wizard addon. This addon has a decent collection of popular builds. This makes things a bit easier for us. Let me show you how to install Kodi builds on Titanium 18.1 using the Supreme Builds Wizard. Follow the steps below:
Note: The method detailed ahead does not require ‘Unknown Sources’ to be enabled in Titanium 18.1
#1. Run Titanium 18.1 on FireStick. You will notice that the interface is exactly the same as the original Kodi.
When you run the fork for the first time, you may see certain pop-ups. The first one looks like what you see in the image below.
#2. Click ‘Continue’ on the next pop-up (if you want to enable any settings, choose accordingly)
#3. The next pop-up asks you to select ‘Build Menu’. This will lead you directly to the list of the builds you can install from Supreme Builds Wizard.
In case you clicked ‘Ignore’ on the popup by mistake or for any reason you don’t see this prompt, follow the next few steps to access the Build Menu
#4. From Titanium 18.1 home-screen, click ‘Add-ons’ on the left side, followed by ‘Program Add-ons’ on the next screen.
Click the Supreme Builds Wizard icon
#5. Select and click “(Supreme Builds) Builds”
#6. You will now be on the Build Menu screen (the same screen you would have seen upon clicking ‘Build Menu’ button in step 3)
Now, all you need to do is choose the build you wish to install and the server from where you will get it. You may pick any server you like as it usually does not make any difference. But, it is best to pick the one closest to your physical location.
Well, that’s pretty much it! You have learned to install multiple builds using multiple instances of Kodi. While I have chosen Titanium 18.1 fork, you may pick any other from several available. If you have any questions or suggestions, fill us in through the comments section below.
How to install Kodi on Fire Stick
How to jailbreak Amazon Fire Stick
Best Amazon Fire Stick Apps
Best VPN for Fire Stick
How to install Kodi Addons over Builds